HP lists no model-specific print driver for the HP LaserJet 2430t on Windows 10 or 11. Use HP’s Universal Print Driver (UPD) below. The DOT4 file is only a USB communication component, not the print driver. HP offers no Mac or Linux driver for this series, only firmware.

Recommended LaserJet 2430t driver downloads
Each LaserJet 2430t file below comes straight from HP’s own servers. hpdrivers.net hosts and changes nothing.
LaserJet 2430t driver: all packages
Windows
File details
File:lj2420_fw_08_120_4.zipFile details
File:lj2420_fw_util_08_120_4.exeOther HP software listed for this series
HP Universal Print Driver
HP lists its Universal Print Driver for this series on Windows 11, Windows 10, 8.1, 8, 7 (32-bit and 64-bit). Get it from our HP Universal Print Driver page.
Installing the LaserJet 2430t driver
When your LaserJet 2430t download finishes, follow these steps.
- Download the Universal Print Driver that matches your Windows (PCL6 is the usual choice).
- Unzip the file and run the setup program.
- Choose Add a printer and pick the USB or network connection.
- Print a test page to confirm.
For step-by-step instructions, see our guide to installing an HP printer driver.
Firmware update 08_120_4
The newest firmware HP lists for the LaserJet 2400 is version 08_120_4, released Jan 13, 2012. HP says it adds code signing, so the printer can check that the firmware really comes from HP.
- Check your current firmware version first on the printer’s Configuration Page, and update only if it is older.
LaserJet 2430t driver alternatives: HP Universal Print Driver
These are all the files HP lists for the LaserJet 2430t driver, including every Universal Print Driver package:
| Package | Version | Size | File |
|---|---|---|---|
| HP Universal Print Driver for Windows PCL6 (ARM64-bit) | 8.2.0.26778 | 20.1 MB | Download |
| HP Universal Print Driver for Windows PCL6 (64-bit) | 8.2.0.26819 | 20.2 MB | Download |
| HP Universal Print Driver for Windows PS (64-bit) | 8.2.0.26819 | 21.4 MB | Download |
| HP Print Administrator Resource Kit | 1.9.2 | 18.7 MB | Download |
| HP Universal Print Driver for Windows PostScript (32-bit) | 8.2.0.26778 | 19.0 MB | Download |
| HP Universal Print Driver for Windows PCL6 (32-bit) | 8.2.0.26778 | 17.8 MB | Download |
| HP Universal Print Driver for Windows PostScript (64-bit) | 8.2.0.26778 | 21.5 MB | Download |
| HP Universal Print Driver for Windows PCL6 (64-bit) | 8.2.0.26778 | 20.3 MB | Download |
LaserJet 2430t extra tray and memory
The “t” in LaserJet 2430t means an additional paper tray: a 500-sheet input tray comes with it, alongside the 100-sheet manual-feed tray and 250-sheet tray. The printer prints 35 ppm on letter paper. In addition, it has 48 MB of RAM, expandable to 304 MB.
Loading tray 3 and supported sizes on the 2430t
Tray 3 takes paper only, in A4, A5, B5 JIS, Letter, Legal, Executive and 8.5 x 13 inches. Also, weights run from 60 to 120 g/m2.
- First, pull the tray out and remove any paper.
- Next, set the rear length guide to the paper size.
- Set the side width guide.
- Then load the paper flat at all four corners, below the hooks.
- Finally, slide the tray back in.
After loading, set TRAY 3 SIZE and TRAY 3 TYPE in the Paper Handling menu, or instead leave them on ANY SIZE and ANY TYPE.
Envelopes, labels and transparencies on the LaserJet 2430t
Special media goes in tray 1 only, because trays 2 and 3 take paper alone. Tray 1 holds up to 100 sheets of paper, 75 transparencies, 50 sheets of labels or 10 envelopes.
- Envelopes: up to 90 g/m2; set margins at least 15.0 mm from the edge.
- Labels and transparencies: 0.10 to 0.14 mm thick.
Envelope printing can be slower, so test a few samples first. However, never use envelopes with clasps, snaps, windows or exposed adhesive.
Custom paper sizes in tray 1 on the LaserJet 2430t
Tray 1 accepts custom sizes from 76 x 127 mm (3 x 5 inches) up to 216 x 356 mm (8.5 x 14 inches). Paper weight can range from 60 to 199 g/m2. Also, the tray holds 100 sheets of 75 g/m2 paper.
If you load a custom size, then tell the printer about it. In the Paper Handling menu, TRAY 1 CUSTOM lets you pick INCHES or MILLIMETERS. Next, enter the X dimension (paper width, 76 to 216 mm) and the Y dimension (length, 127 to 356 mm). Finally, a summary screen confirms the choices.

