The HP DeskJet Ink Advantage 3779 driver download for Windows 11, Windows 10, 8.1, 8, 7 (32-bit and 64-bit) is the HP DeskJet and Ink Advantage 3700 All-in-One Print and Scan Driver and Accessories, and for a Mac HP lists Install HP Easy Start. This page lists HP’s official software for the HP DeskJet Ink Advantage 3779.

Recommended Ink Advantage 3779 driver downloads
Each DeskJet Ink Advantage 3779 file below comes straight from HP’s own servers. hpdrivers.net hosts and changes nothing.
Ink Advantage 3779 driver: all packages
Ink Advantage 3779 driver for Windows
File details
File:DJIA3700_2218A.exeFile details
File:Full_Webpack-40.16.1234-DJ3700_Full_Webpack.exeFile details
File:Basic_Webpack_x64-40.16.1234-DJ3700_Basicx64_Webpack.exeFile details
File:HPEasyStart-13.6.5-DJ3700_40_16_1234_1_Webpack.exemacOS
File details
File:DJ3700_2218A.dmgOther HP software listed for this series
Linux
HP lists Linux support for this series through its HPLIP project, outside the regular download list: HP’s Linux printing page (HPLIP).
Installing the Ink Advantage 3779 driver
When the download from the table above finishes, follow these steps.
- Download the HP Easy Start or Full Feature package for your system from the Recommended downloads box.
- Run it and follow the prompts.
- Connect the printer by USB or Wi-Fi when asked.
- Print a test page to confirm.
For step-by-step instructions, see our guide to installing an HP printer driver.
Firmware update 001.2218A for the DeskJet Ink Advantage 3779
The newest firmware HP lists for the DeskJet Ink Advantage 3700 All-in-One is version 001.2218A, released Jul 26, 2022.
- Keep the printer and the computer switched on until the update has finished.
Printing a Document With the HP DeskJet Ink Advantage 3779 in Windows
First, load paper in the input tray and open the output tray. Then follow these steps.
- In your software, select Print and make sure the printer is selected.
- Click the button that opens Properties. It might be called Options, Printer Setup, Printer Properties, Printer or Preferences.
- Next, choose options on the Printing Shortcut tab. In addition, use the other tabs for more settings.
- Finally, click OK to close the dialog box, and then click Print or OK.
If you change the paper size, load the matching paper.
Printing a Document With the HP DeskJet Ink Advantage 3779 on OS X
On OS X, the Print dialog holds the main settings. To begin, choose Print from the File menu in your software.
- Make sure your printer is selected.
- If you see no options in the dialog, then click Show Details.
- Pick the paper size in the Paper Size pop-up menu.
- Also, select the orientation and enter the scaling percentage.
- Click Print.
Because a new paper size needs matching paper, check the input tray before you print.
Two-Sided Printing in Windows
Start as for a normal job. From your software, select Print and make sure your printer is selected. Next, click the button that opens the Properties dialog box.
- On the Printing Shortcut tab, select the Two-sided (Duplex) Printing shortcut.
- Change other print settings on the other tabs if needed.
- After the first side prints, follow the onscreen instructions to reload the paper.
- Click Continue, and then click OK to print.
If you change the paper size, then make sure the correct paper is loaded.
Two-Sided Printing on OS X
On OS X, you print the sides in two passes. First, choose Print from the File menu.
- In the Print dialog, choose Paper Handling. Set Page Order to Normal.
- Set Pages to Print to Odd Only and click Print.
- After all odd pages print, remove the document from the output tray.
- Then reload it with the end that came out going into the printer. The blank side faces the front.
- Finally, return to Paper Handling, keep Page Order on Normal and set Pages to Print to Even Only.
- Click Print.
Removing Web Services
You can remove Web Services from the printer through the embedded web server (EWS). To begin, open the EWS.
- Click the Web Services tab.
- In the Web Services Settings section, click Remove Web Services.
- Click Remove Web Services again.
- Once the prompt appears, click Yes to remove Web Services from your printer.
To open the EWS, press the Wireless and Information buttons together. As a result, this prints the network configuration page with the IP address. After that, type that address into a browser.