HP Laser 407nk Drivers (Laser 407 Series)

Looking for the HP Laser 407nk driver? This page lists HP’s official software for the whole HP Laser 407 Printer series. HP lists some packages for specific models in the series, so check that the package title includes your model. For Windows 10, 8.1, 7 (32-bit and 64-bit), the package most people need is the HP Laser 407nk Printer Print Driver (no installer).

Last checked against HP’s download list: November 14, 2026 · Checked by H&G

Which Windows package should you choose?

HP publishes 2 kinds of Windows package for the Laser 407:

• Firmware update (v4.82.00.18, Apr 13, 2026): updates the printer itself, not your PC.
• Driver files (no installer) (v3.13.59.00_V06, Apr 09, 2019): bare driver files for Windows’ Add Printer wizard.

All Laser 407nk driver downloads

Windows

Installing the Laser 407nk driver

The steps below install the Laser 407nk driver the way HP’s package expects. Download the file only from the HP link in the table above, and follow the order shown here.

The driver files without an installer are added through Windows’ Add Printer wizard (Have Disk). For step-by-step instructions, see our guide to installing an HP printer driver.

Firmware update 4.82.00.18

The newest firmware HP lists for the Laser 407 is version 4.82.00.18, released Apr 13, 2026.

• Keep the printer and the computer switched on until the update has finished.

Specifications that matter for setup

Toner supplies HP lists for the Laser 407

HP’s specifications name these replacement supplies for the Laser 407:

• HP SI Black Original Laser Toner Cartridge (5

What comes in the box

HP lists these items with the Laser 407:

• Setup Guide
• Reference Guide
• Regulatory Statements Flyer
• Power cord
• USB cable

Paper handling and hardware details

Values below are HP’s published figures for the Laser 407; they help you check that this page matches your printer before you download anything.

Common setup problems

If the Laser 407nk driver installs but the printer still does not respond, check these points first.

• No Wi-Fi option during setup. HP’s specifications list no built-in Wi-Fi for the Laser 407. Use an Ethernet cable or USB.

Replacing the imaging unit on the Laser 407nk

The Laser 407nk uses a separate imaging unit next to the toner cartridge. HP says that when the imaging unit reaches the end of its life the printer stops printing, so a 407nk that will not print after a long service life may need this part rather than a new driver. HP’s replacement steps:

1. Turn the printer off, unplug the power cord from the back and wait a few minutes for it to cool.
2. Open the front cover and remove the toner cartridge.
3. Pull the imaging unit out by the handle on its front.
4. Unpack the new imaging unit and remove its protective cover. HP warns not to open packages with a knife or scissors, which can scratch the drum.
5. Install the new unit, put the toner cartridge back and close the front cover.
6. Plug the printer in and turn it on.

If toner gets on clothing, HP says to wipe it off with a dry cloth and wash in cold water, because hot water sets toner into fabric.

Based on HP support document HP Laser Printer 407nk – Replacing the Imaging Unit; the wording is ours.