The HP DeskJet Ink Advantage 3776 driver download for Windows 11, Windows 10, 8.1, 8, 7 (32-bit and 64-bit) is the HP DeskJet and Ink Advantage 3700 All-in-One Print and Scan Driver and Accessories, and for a Mac HP lists Install HP Easy Start. This page lists HP’s official software for the HP DeskJet Ink Advantage 3776.

Recommended Ink Advantage 3776 driver downloads
Each DeskJet Ink Advantage 3776 file below comes straight from HP’s own servers. hpdrivers.net hosts and changes nothing.
Ink Advantage 3776 driver: all packages
Ink Advantage 3776 driver for Windows
File details
File:DJIA3700_2218A.exeFile details
File:Full_Webpack-40.16.1234-DJ3700_Full_Webpack.exeFile details
File:Basic_Webpack_x64-40.16.1234-DJ3700_Basicx64_Webpack.exeFile details
File:HPEasyStart-13.6.5-DJ3700_40_16_1234_1_Webpack.exemacOS
File details
File:DJ3700_2218A.dmgOther HP software listed for this series
Linux
HP lists Linux support for this series through its HPLIP project, outside the regular download list: HP’s Linux printing page (HPLIP).
Installing the Ink Advantage 3776 driver
When the download from the table above finishes, follow these steps.
- Download the HP Easy Start or Full Feature package for your system from the Recommended downloads box.
- Run it and follow the prompts.
- Connect the printer by USB or Wi-Fi when asked.
- Print a test page to confirm.
For step-by-step instructions, see our guide to installing an HP printer driver.
Firmware update 001.2218A for the DeskJet Ink Advantage 3776
The newest firmware HP lists for the DeskJet Ink Advantage 3700 All-in-One is version 001.2218A, released Jul 26, 2022.
- Keep the printer and the computer switched on until the update has finished.
Finding a Faulty Cartridge on the HP DeskJet Ink Advantage 3776
Check the Ink Alert light and the matching Ink Level icon first. If the printer software reports a cartridge problem, you can test each cartridge.
- Remove the black cartridge and close the cartridge access door. If the tri-color Ink Level icon blinks, that cartridge has the problem.
- Put the black cartridge back and remove the tri-color one. Close the door again.
- If the black Ink Level icon blinks, the black cartridge has the problem.
No blinking means that cartridge is fine.
Cleaning the Cartridge Contacts on the HP DeskJet Ink Advantage 3776
First, remove the cartridges and check that the protective plastic tape is gone. Then reinsert them. If the error stays, clean the contacts, and replace the cartridges if that fails.
- Make sure power is on. Open the cartridge access door and wait for the carriage to move to the center.
- Remove the cartridge named in the error message.
- Wipe the gold-colored dots on the cartridge, then the bumps inside the printer, with a dry swab or lint-free cloth.
- Reinstall the cartridge and close the door.
Do not leave a cartridge out longer than 30 minutes. That could damage the printhead or the cartridge.
Printer Not Printing in Windows
Make sure the printer is on and paper is in the input tray. If it still does not print, try these steps in order.
- Check the printer software for error messages and follow the onscreen instructions.
- Reconnect the USB cable, or confirm that the wireless connection works.
- In the print queue, check that the Printer menu has no check mark next to Pause Printing or Use Printer Offline.
- Make sure the printer is the default printer. It shows a check mark in a black or green circle.
If it is not, right-click it and select Set as Default Printer.
Print Spooler and Print Queue
If those steps do not help, restart the print spooler. Open Services from Administrative Tools in the Control Panel. Right-click Print Spooler and choose Properties. On the General tab, make sure Startup type is Automatic. If the service is not running, click Start, and then click OK.
Next, restart the computer. After that, open the print queue and click Cancel all documents or Purge Print Document, then click Yes. If documents remain, restart again.
On OS X, open Printers & Scanners in System Preferences. Then click Open Print Queue to use Delete, Hold, Resume or Pause Printer.
Copy, Scan and Hardware Problems
For copy and scan problems, HP offers online troubleshooting wizards. The HP Print and Scan Doctor can also diagnose scan issues, but only on Windows. Neither may be available in every language.
For hardware problems, the guide gives short checks:
- Close the cartridge access door, because printing cannot start with it open.
- If the printer shuts down unexpectedly, check the power connections and the outlet.
- When Auto-Off is enabled, the printer turns off after 2 hours of inactivity.
- For a printer failure, turn it off and on. If that fails, contact HP.