HP Officejet Pro 8610 Drivers (Officejet Pro 8610 e-All-in-One Series)

Looking for the HP Officejet Pro 8610 driver? This page lists HP’s official software for the whole HP Officejet Pro 8610 e-All-in-One Printer series. HP lists some packages for specific models in the series, so check that the package title includes your model. For Windows 11; Windows 10, 8.1, 8, 7 (32-bit and 64-bit), the package most people need is the HP OfficeJet Pro 8610 e-All-in-One Printer series / HP OfficeJet 8600 Series Printer Full Feature Software and Drivers. For a Mac, HP lists Install HP Easy Start.

Which Windows package should you choose?

HP publishes 4 kinds of Windows package for the Officejet Pro 8610 e-All-in-One:

• HP Universal Print Driver (v8.2.89, Sep 11, 2026): HP’s shared driver for many models, also listed for this series.
• Driver-only installer (v32.4.116, Dec 06, 2021): print driver only, for PCs that can’t or shouldn’t take the full package.
• Full software solution (v32.4.116_1, May 24, 2022, 123.9 MB): driver plus HP’s setup wizard and tools.
• Firmware update (v1910A, Jan 26, 2021): updates the printer itself, not your PC.

All downloads for the Officejet Pro 8610 e-All-in-One

Windows

macOS

Other HP software listed for this series

HP Universal Print Driver

HP lists its Universal Print Driver for this series on Windows 11; Windows 10, 8.1, 8, 7 (32-bit and 64-bit). Get it from our HP Universal Print Driver page.

Linux

HP lists Linux support for this series through its HPLIP project, outside the regular download list: HP’s Linux printing page (HPLIP).

Installing the Officejet Pro 8610 e-All-in-One driver

For step-by-step instructions, see our guide to installing an HP printer driver.

Firmware update 1828A

The newest firmware HP lists for the Officejet Pro 8610 e-All-in-One is version 1828A, released Jul 31, 2018. HP’s notes for it: Network component update.

• Keep the printer and the computer switched on until the update has finished.

Specifications that matter for setup

Ink supplies HP lists for the Officejet Pro 8610 e-All-in-One

HP’s specifications name these replacement supplies for the Officejet Pro 8610 e-All-in-One:

• HP 950 Black Officejet Ink Cartridge (~1000 pages)
• HP 951 Cyan Officejet Ink Cartridge
• HP 951 Magenta Officejet Ink Cartridge
• HP 951 Yellow Officejet Ink Cartridge: composite

Paper handling and hardware details

Values below are HP’s published figures for the Officejet Pro 8610 e-All-in-One; they help you check that this page matches your printer before you download anything.

Common setup problems

• You’d rather not install software on a Mac. HP’s specifications list AirPrint support, so macOS can usually add the printer from System Settings without extra software.

Print Quality Diagnostic Page and printhead on the OfficeJet Pro 8610

HP lists its 8600 print quality article on the 8610 series page. After the cartridge and paper checks, it moves to the printer’s own tools.

Reading and aligning

• Load plain white paper, swipe to Setup, touch Print Reports and then Print Quality Report. HP says to review the test patterns on the diagnostic page.
• To align, go to Setup, Tools, Align Printhead. After the alignment page prints touch OK, discard the page and print another diagnostic page to see whether the problem is gone.
• To read the estimated ink levels touch the Ink Level Indicator icon on the control panel. HP says the levels are estimates and that a cartridge does not need replacing until the printer asks for it.

If HP asks for a new printhead

• Open the cartridge access door by pulling on the slot on the left side, lift the latch handle on the carriage, hold the printhead by its sides and lift it out toward you. HP says the cartridges can stay in the printhead and that you should not touch the underside.
• Insert the new printhead with the electrical contacts toward the rear of the printer and lower the latch. HP warns not to touch the contacts or the nozzles and not to lift the latch when inserting cartridges, because the printhead or cartridges can seat wrongly and damage the print mechanism.

Source: HP Support, HP OfficeJet 8600, Pro 8600 Printers – Color or black ink not printing, other print quality issues.

Where paper jams on the OfficeJet Pro 8610

HP’s 8600 jam article lists the rear duplexer, Tray 1, Tray 2 and the document feeder, then checks the carriage and cleans the rollers. The 8610 has a single 250-sheet tray in the specifications above, so its Tray 1 and rear sections matter most.

Tray 1 and the feeder

• Remove the paper from the output tray and take Tray 1 out. HP says to pull any jammed paper at the bottom slowly toward you with both hands.
• When you reload, tap the stack even, keep it below the dotted yellow lines on the tray sides and set the length and width guides against the paper. Never mix paper types.
• In the document feeder lift the cover, lift the tab on the left edge of the feeder, push in the green tab in the center and pull the sheet out with both hands. Pull the green tab back up and close the cover firmly at both ends.

Carriage and rollers

• With the power cord unplugged HP says to open the cartridge access door and move the carriage by hand. If it sits on the right or in the middle, move it to the left, and if it sits on the left, move it to the right. Then check that it travels across the full width.
• HP says dust and paper fiber on the feed rollers cause jams, and describes cleaning them with a lint-free cloth or swab dampened with distilled, filtered or bottled water, since tap water can damage the printer.

Source: HP Support, HP OfficeJet 8600 Printers – ‘Paper Jam’ error.

Printer Failure message on the OfficeJet Pro 8610

The HP article for the 8600, 6000, 7000 and 276 lines is also listed on the 8610 series page. It covers a printer that stops with a Printer Failure message.

What HP lists

• Unplug the cord with the printer on, open the carriage door, remove crumpled paper or dislodged labels, and slide the carriage to each side to see that it moves freely.
• If the carriage is stalled or docked on one side and will not move, HP says to continue with the reset: turn the printer off, unplug it, wait 60 seconds and connect it straight to a wall outlet.
• If the error returns HP says to service or replace the printer.

Source: HP Support, HP OfficeJet 276, 6000, 7000, 8600 – ‘Printer Failure’ error.